General Plumbing in Swansea
Leak Detection Swansea
Water going somewhere it shouldn't, and no visible sign of where. Leak detection in Swansea tracks hidden leaks through walls, slabs and underground runs, so you get the fix without tearing the house apart first.
Plumbers Swansea handles it across Swansea and nearby suburbs every week, alongside the full range on the general plumbing hub.
Some leaks announce themselves. Most don't. They sit quietly in the meter numbers, the water bill or a damp smell that never quite clears, and the quiet ones are always the expensive ones by the time they're found.
Signs you're paying for a leak you can't see
The symptoms below come up on detection calls constantly. Any one of them is worth a look.
- The water meter turns with every tap, hose and appliance switched off
- A bill that climbs without your usage changing
- A patch of lawn that stays green and soft through the driest weeks
- The sound of running water when nothing is running
- A warm slab spot in winter, pointing at a hot water line under the floor
- Mould or a musty smell on one wall with no obvious source
Two or three of those together usually mean the water is escaping underground or inside a cavity. The meter test settles it in minutes.
Why this suburb hides its leaks so well
Low-lying ground and salt air make leak-finding here a different job to the same job inland.
The ground is already wet.
Salt finds the weak points first.
How we track the leak down
Detection runs in stages, least disruptive first.
- 1
Meter isolation test
Every fixture and appliance gets shut off, then we watch the meter. Movement means a genuine loss on your side; a still meter redirects the question to Hunter Water.
- 2
Acoustic tracing
Listening gear follows the line along walls, slabs and above-ground runs to pinpoint where the water escapes.
- 3
Line location and pressure testing
Sections get isolated one at a time to narrow the fault to a single run, so the repair is scoped before any access is opened.
- 4
The quote
You get the repair price in writing, with access agreed up front, before a tool comes out.
That sequence keeps the digging to a minimum. In most cases there is no digging at all until the repair itself, and never any exploration holes.
What the leak turns out to be
Four findings cover most of the calls we get.
A burst or weeping pipe in the wall
Corroded copper inside older wall cavities is the classic find here, especially in fibro and weatherboard homes, and the burst pipes page covers the urgent version when the fault splits suddenly.
A leak in the underground supply line
Sandy soil lets a buried copper run lose water for months with nothing showing above ground, and if the meter or connection side is at fault, the water meter installation page covers it.
A hot water line losing water
A warm patch on the slab or a tank that drains faster than it should often points to a leaking line rather than a dead unit, and hot water repair covers that.
A drain leaking instead of a supply line
Not every hidden leak is pressurised. A cracked sewer or stormwater run under the yard shows up as sinkage or damp, and a CCTV drain inspection settles it.
From first check to finished fix
- 1
Call and tell us
Ring (02) 4063 3446 and tell us what's going on in Swansea. We'll ask a few quick questions so the right gear is on the truck the first time.
- 2
Quote before work
You get the price before anything starts. No call-out fee, no hourly surprises. You approve the quote or we shake hands and leave, no charge.
- 3
Find the leak
We trace the line, confirm exactly where the water is escaping and quote the repair on the spot, so you decide with the full picture in front of you.
- 4
Backed, no questions asked
If something isn't up to standard afterwards, we come back and make it right, no questions asked. That's the standard every Swansea job is held to.
What the work costs
The call out is $0, and the detection work is quoted before anything begins. One thing worth knowing up front: the high water table here means below-ground access is slower and wetter than on higher ground, so a repair that needs trenching near the channel is priced for that reality rather than guessed at.
If a leak has already caused damage you can see, the emergency plumbing hub is the faster route.
Leak detection questions from locals
How do you find a leak without digging up the yard?
Acoustic listening gear, meter isolation tests and line tracing show where the loss sits before any digging starts, so excavation only happens once the repair itself is already quoted.
Why is my water bill so high with nothing visibly wet?
A buried copper run can lose litres every hour straight into sand with nothing showing on the surface, and a meter test confirms the loss before we quote the repair.
Can you tell if a leak is my problem or Hunter Water's?
We isolate the meter and watch it. Movement with every tap closed means the leak is on your side of the connection, while a still meter points back to Hunter Water.
What does leak detection cost?
The call out costs nothing, and after the tracing work the repair is quoted as a fixed figure before any work starts, so you approve it or we leave at no charge.
Do you repair the leak once you find it?
Yes, wherever access allows, with the repair priced into the same quote as the detection. If the fix needs a second visit or excavation, you get that figure in writing first.
Can a hidden leak come back after the repair?
Repaired joints hold, but salt-corroded copper near the water can fail further along the same run later, so we say plainly when a section has had it and quote the full fix.
Get the leak found
Call (02) 4063 3446 and tell us what's happening. $0 call out across Swansea, a clear quote before any work starts, and a job that gets made right if it isn't right the first time.
Plumbers in Swansea and the suburbs around it